|
|
|
|
|
| International Agrophysics |
| wydawca: | Instytut Agrofizyki
im. B. Dobrzańskiego
PAN
w Lublinie |
| ISSN: |
0236-8722 |
vol. 18, nr. 4 (2004)
|
|
|
poprzedni artykuł wróć do listy artykułów następny artykuł
|
|
|
Effects of grain properties on loads in model silo
|
|
| (pobierz wersję PDF )
|
|
|
Molenda M.1, Horabik J.1, Thompson S.A.2, Ross I.J.3
|
|
|
1 Institute of Agrophysics, Polish Academy of Sciences, Doświadczalna 4, P.O. Box 201, 20-290 Lublin 27, Poland |
|
|
2 Department of Biological and Agricultural Engineering, University of Georgia, Athens, GA 30602, USA |
|
|
3 Department of Biosystems and Agricultural Engineering, University of Kentucky, Lexington, KY 40546, USA |
|
|
vol. 18 (2004), nr. 4,
pp. 329-332
|
|
|
streszczenie
This work addresses the variation in wall loads in thin, smooth walled, flat floor metal silos caused by the variation in the mechanical properties of the grain bedding and friction forces acting on the grain-wall interface. Experimental effects shown and discussed are not fully covered by standard design codes. Background of some of these phenomena is still poorly understood, and as such a satisfactory theoretical description for the causes of these phenomena cannot be offered. As illustrated by experimental results, these effects can cause additional loads to occur on silo walls.
|
|
słowa kluczowe
grain silo, mechanical properties, silo loads
|
|
|
|
|
|
|
